Liquid Filter Bag Filter Element
EcoSEP Filter Bags are the most economic conventional filter bags
with simple bag structure. It applies to the removing particles of
various sizes. PP, PE needle felt bags applies to nominal precision
filtration, NM nylon mesh bags applies to filtration at low
ratings, PX, EX multifilament filter bags applies to absolute
efficiency filtration at high filtration rating. EcoSEP has three
sizes, filter area is 0.1m2, 0.25m2 and 0.5m2. It follows
international standards and is compatible to bag filter housings of
current mainstream brands. Optional media is PP, PE, NM, PX and EX.
LIVIC filter bag includes Depth Filtration Type and Mesh Surface
[Depth Filtration] Filtration layer consists of crossing fine fibers by kind of
froming rules, is good at removing small solid particles and some
soft impurites. It observably clarifies the liquid and is a kind of
disposable filtration media. The depth space has stronger dirty
holding capacity. It applies to liquid filtration of normal and low
viscosity at high filtration ratings.
[Mesh Surface Filtration] Filter layer consists of smooth rigid mesh weaved by monofilament
and the surface mesh is usually
square hole type. It is good to remove larger solid particles.
Particle larger than mesh size will be blocked and particles
smaller than mesh size pass easily. The mesh surface filtration has
the screening function at set. The filter cake on the mesh surface
is easy to strip and clean and the mesh filter media can be reused
for several times after cleaning.
|Material||Polypropylene Needle Felt/Polyester Needle Felt/Nylon Monofilament
Mesh/Polypropylene Multifilament/ Polyester Multifilament|
1#Filter Bag,Φ178mm,Length 419mm
2#Filter Bag,Φ178mm,Length 813mm
4#Filter Bag,Φ102mm,Length 355mm
■ Applicable industries: Fine chemicals, water treatment systems,
plup and paper, automobile manufacturing, petro-chemical,
machining, coatings, electronics etc.
■ Applicable liquids: Wide applicability, all liquids contained